No, Irrigreen sprinkler heads only work with the complete Irrigreen system.
No, Irrigreen cables transfer both power and data from the controller, so your installation should be installed with our proprietary cable system.
Each head can cover up to 2,200 square feet without obstacles. If you have trees, pathways, steep hills, or irregular shapes, you may need more. We recommend starting with the bundle that most closely fits your lawn and adding heads if necessary.
You can either use the
Irrigreen Quote Tool
to map out your design or just mark it off with a tape measure. Each head can spray up to a 30 ft radius with standard water pressure. The spray pattern is mapped after installation, so your placement of each head doesn't have to be perfect before you put them in the ground; just make sure each head is less than 30 feet from the edge of your lawn or less than 60 feet from another head.
Irrigreen heads are tested to simulate ten years of underground durability. We offer a 2-year warranty for peace of mind. If you have an issue with a head during that time that can't be fixed, we'll ship you a new one.
We include a 2-year warranty with all purchases. It covers all Irrigreen parts including heads, cables, and controllers.
Irrigreen is so easy to install, we find that most customers do it themselves. You can watch our video installation guide
here.
Yes! Many of our customers have existing systems in place. The easiest way is to just cap off your old heads and dig a new trench for Irrigreen. You can leave your existing pipes underground -- no need to spend time and effort digging them up.
You can mix different models of heads if you are replacing old Irrigreen heads and want to upgrade. We do not recommend setting up new systems this way. Our software works best when all of your heads are the same model.
You need 40-80psi. Not sure how much you have? Check with your water provider or do a simple bucket test: if you can fill a 5-gallon bucket from your garden hose in less than 45 seconds, you're in good shape.
